Olivetti d-Copia 3500MF Service Manual page 104

Item No.
U052 Setting: [Set Loop Sensor Valid]
1. Select On or Off.
Initial setting: On
2. Press the start key. The setting is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
U053 Setting the adjustment of the motor speed
Description
Performs fine adjustment of the speeds of the motors.
Purpose
Basically, the setting need not be changed. Modify settings by interlock setting only if faulty
images occur.
Method
1. Press the start key.
2. Select the item to be adjusted
Display
Moter1
Moter2
Moter3
Moter1 Half
Moter2 Half
Moter3 Half
Setting: [Motor1]
1. Select the item to be adjusted.
Display
Drum(K)
Service Manual
Description
Adjustment of drum motor speeds
Adjustment of developer motor, registration motor and transfer motor
speeds
Adjustment of eject motor, fuser motor, bridge conveying motor 1/2, paper
feed motor, JS eject motor, middle motor and duplex motor 1/2 speeds
Adjustment of drum motor speeds in half speed
Adjustment of developer motor, registration motor and transfer motor
speeds in half speed
Adjustment of eject motor, fuser motor, bridge conveying motor 1/2,
paper feed motor, JS eject motor, middle motor and duplex motor 1/2
speeds in half speed
Description
Drum motor (DRM)
1-3-42
Description
Setting
range
35ppm 45ppm 55ppm
-5000 to 5000 78
2LL/2LJ/2LH
Initial setting
60 49
Y113350-5