Olivetti d-Copia 3500MF Service Manual page 291

Code Contents
8210 DF slide motor error
When initial operation, DF sta-
ple sensor does not turn on
within 3 s.
8230 DF staple motor error 1
JAM7000 is detected twice.
Y113350-5
Causes
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet DF slide motor and DF main PWB (YC12)
finisher). DF staple sensor and DF main PWB (YC22)
Reinsert the connector. Also check for conti-
Defective connec-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet DF slide motor and DF main PWB (YC10)
finisher). DF staple sensor and DF main PWB (YC20)
Defective DF sta- Replace the DF staple sensor.
ple sensor.
Defective DF slide Replace the DF slide motor.
motor.
Defective DF main Replace the DF main PWB and check for
PWB. correct operation.
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet Staple unit and DF main PWB (YC17)
finisher).
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
Staple unit and DF main PWB (YC11)
nector (1000-sheet
finisher).
Defective DF sta- Replace the staple unit.
ple sensor.
Defective DF sta-
ple motor.
Defective DF main Replace the DF main PWB and check for
PWB. correct operation.
1-4-49
2LL/2LJ/2LH
Check procedures/
corrective measures
Sevice Manual