Olivetti d-Copia 3500MF Service Manual page 166

Item No.
U234 Setting punch destination
Description
Sets the destination of punch unit of 1000-sheet finisher or 4000-sheet finisher.
Purpose
To be set when installing a different punch unit from the destination of the machine.
Setting
1. Press the start key.
2. Select the destination.
Auto
Japan Metric
Inch
Europe Metric
Initial setting: Inch (Inch specifications)/Europe Metric (Metric specifications)
3. Press the start key. The setting is set.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Service Manual
Display
Conforms to destination settings.
Metric (Japan) specifications
Inch (North America) specifications
Metric (Europe) specifications
Description
Description
1-3-104
2LL/2LJ/2LH
Y113350-5