Table of Contents
Advertisement
6. Remove four screws and then remove
the ISU.
Refitting the ISU
7. Decide the fix position of ISU by the fol-
lowing.
The right and left of machine:
Confirm the number (a) of seal pasted
on lens.
Match the line (c) of ISU to the position-
ing line (b) of same number on frame
side.
The rear and front of machine:
Match the edge (e) of ISU to the posi-
tioning line (d) on frame side.
8. Fix the ISU as before with four screws.
9. Refit all the removed parts.
Y113350-5
Screw
Screw
Figure 1-5-39
b
e
d
Figure 1-5-40
1-5-23
2LL/2LJ/2LH
ISU
c
Lens
ISU
Sevice Manual
Screw
Screw
a
Advertisement
Table of Contents
