12. Release the wire saddle.
13. Remove two wire holders.
14. Remove two screws.
15. Remove the fan motor holder.
16. Remove two screws and then remove
the upper controller box cover and DP
relay PWB.
17. Remove five screws from the main
PWB.
Y113350-5
Wire holder
Fan mootor holder
Wire saddle
Screws
Screw
Upper
controller
box cover
DP raley PWB
1-5-41
Screws
Controller box
Figure 1-5-67
Main PWB
Screws
Screw
Main PWB
Figure 1-5-68
Sevice Manual
2LL/2LJ/2LH
Wire holder