Olivetti d-Copia 3500MF Service Manual page 130

Item No.
U101 Setting the voltage for the primary transfer
Description
Sets the control voltage for the primary transfer.
Purpose
To change the setting when any density problems, such as too dark or light, occur.
Setting
1. Press the start key.
2. Select the item to be set.
Normal
Add Color
Add Color 2nd
Surround Correct
Setting: [Normal]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.ll
Display
Full
Half
3/4
3. Press the start key. The value is set.
Setting: [Add Color]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.l
C
M
Y
3. Press the start key. The value is set.
Service Manual
Display
Setting the primary transfer positive voltage
Setting the addition value
Setting the addition value for the second side
Environmental correction ON/OFF setting
Description
Primary transfer positive volt-
age for yellow (full speed)
Primary transfer positive volt-
age for yellow (half speed)
Primary transfer positive volt-
age for yellow at 3/4 times of
line speed
Display
Addition value (cyan)
Addition value (magenta)
Addition value (black)
Description
Description
Setting
range
0 to 255
0 to 255
0 to 255
Description
1-3-68
Initial setting
30ppm 35ppm 45ppm 55ppm
114 118 126
101 103 108
158 158 158
Setting
range
-127 to 127 2
-127 to 127 2
-127 to 127 5
2LL/2LJ/2LH
131
110
158
Initial
setting
Y113350-5