Detaching And Refitting The Forwarding Pulley, Paper Feed Pulley And Separation Pulley. [35 Ppm Model] - Olivetti d-Copia 3500MF Service Manual

(2) Detaching and refitting the forwarding pulley, paper feed pulley and separation
pulley. [35 ppm model]
Procedure
1. Remove the primary paper feed unit
(see page 1-5-3).
Detaching the forwarding pulley and paper
feed pulley
2. Remove four stop rings.
3. Slide the paper feed pulley shaft.
4. Remove the joint and three bushes.
5. Remove the spring and forwarding pul-
ley holder assembly.
Y113350-5
Stop rings
Stop ring
Forwarding pulley
holder assembly
Bush
Joint
Bush
1-5-7
Stop ring
Primary paper
feed unit
Figure 1-5-9
Paper feed pulley shaft
Figure 1-5-10
Sevice Manual
2LL/2LJ/2LH
Spring
Bush