Image Formation Problems; No Image Appears (Entirely White) - Olivetti d-Copia 3500MF Service Manual

1-4-3 Image formation problems

If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
See page 1-4-61
(6) Black streaks
are printed verti-
cally.
See page 1-4-63
(11) The leading
edge of the
image is con-
sistently mis-
aligned with the
original.
See page 1-4-65
(16)Fusing is loose. (17)Image is out of
See page 1-4-66
Service Manual
(2) No image (3) Image is too
appears (entirely
black).
See page 1-4-62
(7) Streaks are (8) One side of the
printed horizon-
tally.
See page 1-4-64
(12)The leading (13)Paper is wrin-
edge of the
image is spo-
radically mis-
aligned with the
original.
See page 1-4-65
(18)Image center
focus.
See page 1-4-66
(4) The back-
light.
See page 1-4-62 See page 1-4-63
(9) Spots are
print image is
darker than the
other.
See page 1-4-64 See page 1-4-64
(14)Offset occurs.
kled.
See page 1-4-65 See page 1-4-65
(19)Unevenly repeat-
does not align
with the original
center.
See page 1-4-67 See page 1-4-67
1-4-60
(5) White streaks
ground is col- are printed verti-
ored. cally.
See page 1-4-63
(10)Image is
printed.
See page 1-4-64
(15)Part of image is
See page 1-4-66
(19)Colored spots
ing horizontal
streaks in the
printed objects.
See page 1-4-67
2LL/2LJ/2LH
blurred.
missing.
in the printed
objects.
Y113350-5