Table of Contents
Advertisement
Item No.
U246
Setting: [Staple HP]
1. Select [Staple HP].
2. Change the setting value using the +/- keys or numeric keys.
Adjustment of front and back stapling home position -15 to 15
When staple positions are off toward the front side of the machine (sample 1), increase the
setting value. When staple positions are off toward the rear side of the machine (sample 2),
decrease the setting value.
3. Press the start key. The value is set.
Method: [Booklet]
1. Select the item to set.
Width Up HP
Width Down HP
Staple Pos1
Staple Pos2
Staple Pos3
Booklet Pos1
Booklet Pos2
Booklet Pos3
Three Fold
Y113350-5
Description
Sample 1
Display
Adjustment of upper side registration home position
Adjustment of lower side registration home position
Adjustment of booklet stapling position for A4/Letter size
Adjustment of booklet stapling position for B4/Legal size
Adjustment of booklet stapling position for A3/Ledger/8K size
Adjustment of center folding position for A4/Letter size
Adjustment of center folding position for B4/Legal size
Adjustment of center folding position for A3/Ledger/8K size
Adjustment of tri-folding position
Description
Setting
range
Sample 2
Figure 1-3-21
Description
1-3-117
2LL/2LJ/2LH
Initial
Change in
setting
value per step
0
0.19 mm
Sevice Manual
Advertisement
Table of Contents
