Olivetti d-Copia 3500MF Service Manual page 174

Item No.
U244 Checking the DP switches
Description
Displays the status of the respective switches and sensors in the DP.
Purpose
To check if respective switches and sensors in the DP operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Feed
Regist
Timing
CIS Head
Tray
*1
Set
Longitudinal
Lift U-Limit
Lift L-Limit
Cover Open
Open
Eject
Slant
*1: Reversed DP only. *2: Dual scan DP only.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Service Manual
Display
DP feed sensor (DPFS)
DP registration sensor (DPRS)
*1
DP timing sensor (DPTS)
*2 DP CIS sensor (DPCS)
DP switchback sensor (DPSBS)
DP original sensor (DPOS)
DP original length switch (DPOLSW)
DP lift sensor 1 (DPLS1)
DP lift sensor 2 (DPLS2)
DP interlock switch (DPILSW)
DP open/close switch (DPOCSW)
DP eject sensor (DPES)
DP slant sensor (DPSS)
*2
Description
Description
1-3-112
2LL/2LJ/2LH
Y113350-5