(4) Detaching and refitting the hard disk unit
Procedure
1. Perform maintenance mode U917
(backup data reading) (see page 1-3-
167).
2. Remove the rear upper cover (see page
1-5-52).
3. Release the wire saddle.
4. Remove two screws.
5. Unhook two hooks and pull out the
HDD bracket a little.
Y113350-5
Screws
Wire saddle
Hook
Hook
HDD bracket
1-5-69
Figure 1-5-112
Figure 1-5-113
Sevice Manual
2LL/2LJ/2LH