Clear Ipv6 Traffic - Edge-Core ECS4810-12M Layer 2 Management Manual

| IP Interface Commands
C 45
HAPTER
IPv6 Interface

clear ipv6 traffic

ping6
Table 205: show ipv6 traffic - display description (Continued)
Field Description
group membership The number of ICMPv6 Group Membership Response messages
response messages sent.
group membership The number of ICMPv6 Group Membership Reduction messages
reduction messages sent.
multicast listener The number of MLDv2 reports sent by the interface.
discovery version 2
reports
UDP Statistics
input The total number of UDP datagrams delivered to UDP users.
no port errors The total number of received UDP datagrams for which there was
no application at the destination port.
other errors The number of received UDP datagrams that could not be
delivered for reasons other than the lack of an application at the
destination port.
output The total number of UDP datagrams sent from this entity.
This command resets IPv6 traffic counters.
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
This command resets all of the counters displayed by the show ipv6 traffic
command.
E
XAMPLE
Console#clear ipv6 traffic
Console#
This command sends (IPv6) ICMP echo request packets to another node on
the network.
S
YNTAX
ping6 {ipv6-address | host-name} [count count] [size size]
ipv6-address - The IPv6 address of a neighbor device. You can
specify either a link-local or global unicast address formatted
according to RFC 2373 "IPv6 Addressing Architecture," using 8
colon-separated 16-bit hexadecimal values. One double colon may
be used in the address to indicate the appropriate number of zeros
required to fill the undefined fields.
host-name - A host name string which can be resolved into an IPv6
address through a domain name server.
count - Number of packets to send. (Range: 1-16)
– 1400 –