What Can Be Configured - Agilent Technologies E5900B User Manual

Configuring the Emulation Probe
The emulation probe has several user-configurable options. These options
may be customized for specific target systems and saved in configuration files
for future use.
The easiest way to configure the emulation probe is through the Emulation
Control Interface in an Agilent 16700-series logic analysis system.
For more information on starting the emulation control interface, select Help...
from the emulation probe/module icon.
If you use the Emulation Control Interface, please refer to the online help in the
Configuration window for information on each of the configuration options.
Other ways to configure the emulation probe are by using:
• The emulation probe's built-in terminal interface
• Your debugger, if it provides an "emulator configuration" window which
can be used with this emulation probe

What can be configured

The following options can be configured using built-in commands:
• Processor type
• Break in behavior
• Trigger out behavior.
• Restriction to real-time runs
• JTAG clock speed
• Voltage reference
• Voltage threshold
The chapter ends with a section on Configuring the Emulation Probe for
Maximum Performance.
62 Emulation for the Motorola M•CORE