Configuring the Emulator
The emulator has several user-configurable options. These options may
be customized for specific target systems and saved in configuration
files for future use.
The easiest way to configure the emulator is through the Emulation
Control Interface in an HP16600A or HP16700A logic analysis
system.
If you use the Emulation Control Interface, please refer to the online
help in the Configuration window for information on each of the
configuration options.
Other ways to configure the emulator are by using:
• the emulator's built-in terminal interface
• your debugger, if it provides an "emulator configuration" window which
can be used with this HP emulator
What can be configured
See your processor-specific emulation or solution User's Guide for
information on the configuration options for your emulator. The options are
the same for the E5900A and the E5900B.
54
E5900B / E5901B User's Guide Supplement