Graphical Scenario Editor - LeCroy USB Protocol Suite Advisor T3 User Manual

USB Protocol Suite User Manual

12.8 Graphical Scenario Editor

The Graphical Scenario Editor allows you to create Host Emulator scenarios (only), using
high-level constructs and graphical elements.
After inserting an item, you can modify these elements through simple edit boxes and
pull-down selections by clicking on elements.
You can insert the following items:
• High-Level SCSI Commands (SPC-3, SBC-2, SMC-2, SSC-2, MMC-5, SCC-2, and
SES-2)
• High-Level Task Management Functions
• Bus Enumeration / Control Requests
• Settings
• Mass Storage Transfer Packets
• Instructions (Start Loop, End Loop, Delay, Stop Exerciser)
After you create a new graphical scenario, use the following steps to edit or build the
scenario.
LeCroy Corporation
Chapter 12: Traffic Generation (3.0 Exerciser)
321