Assembling Clamp Bracket - TOHATSU EverRun MX 18E2 Service Manual

Bracket
2 2
1 1
7-36
4. Remove swivel bracket shaft and swivel bracket.

13) Assembling Clamp Bracket

1. Apply grease to swivel bracket, swivel bracket shaft,
bushing.
2. Put bushing to swivel bracket, and then, insert swivel
bracket shaft 1 into clamp bracket 2.
3. Tighten nylon nut to the specified torque.
Nylon Nut :
19 N · m (14 lb · ft) [1.9 kgf · m]
GB
2st X18E2 2012