Parameters: 0-** Operation And Display; Basic Settings; Language; Motor Speed Unit - Danfoss VLT AutomationDrive Programming Manual

Parameter Descriptions

3.2 Parameters: 0-** Operation and Display

Parameters related to the fundamental functions of the
3 3
Adjustable frequency drive, function of the LCP buttons
and configuration of the LCP display.

3.2.1 0-0* Basic Settings

0-01 Language

Option:
[0] English
*
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
Svenska
[7] Nederlands
[10] Chinese
Suomi
[22] English US
Greek
Bras.port
Slovenian
Korean
Japanese
Turkish
Trad.Chinese
Bulgarian
Srpski
Romanian
Magyar
Czech
3-2
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20872-Danfoss-131H4490-VLT-Automation-VT-Drive-VFD-FC302-460V-25-HP.aspx
FC 300 Programming Guide
Function:
Defines the language to be used in the
display. The adjustable frequency drive
can be delivered with 4 different
language packages. English and German
are included in all packages. English
cannot be erased or manipulated.
Part of Language packages 1 - 4
Part of Language packages 1 - 4
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
Part of Language package 1
Part of Language package 4
Part of Language package 4
Part of Language package 4
Part of Language package 3
Part of Language package 2
Part of Language package 2
Part of Language package 4
Part of Language package 2
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 3
MG33MD22 - VLT
0-01 Language
Option:
Polski
Russian
Thai
Bahasa Indonesia Part of Language package 2
[52] Hrvatski

0-02 Motor Speed Unit

Option: Function:
The display showing depends on settings in
0-02 Motor Speed Unit and 0-03 Regional Settings. The
default setting of 0-02 Motor Speed Unit and
0-03 Regional Settings depends on which region of
the world the Adjustable frequency drive is supplied
to, but can be re-programmed as required.
NOTE!
Changing the Motor Speed Unit will reset certain
parameters to their initial value. It is
recommended to select the motor speed unit
first before modifying other parameters.
[0] RPM Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1] Hz Selects display of motor speed variables and
*
parameters (i.e., references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
NOTE!
This parameter cannot be adjusted while the motor is
running.
0-03 Regional Settings
Option: Function:
[0] Interna- Activates 1-20 Motor Power [kW] for setting
*
tional the motor power in kW and sets the default
value of 1-23 Motor Frequency to 50 Hz.
[1] US Activates 1-20 Motor Power [kW] for setting
*
the motor power in HP and sets the default
value of 1-23 Motor Frequency to 60 Hz.
NOTE!
This parameter cannot be adjusted while the motor is
running.
®
is a registered Danfoss trademark
Function:
Part of Language package 4
Part of Language package 3
Part of Language package 2