Digital/Bus; Coasting Select; Dc Brake Select; Reversing Select - Danfoss VLT AutomationDrive Programming Manual

Parameter Descriptions

3.10.5 8-5* Digital/Bus

Parameters for configuring the control word Digital/Bus
merging.
NOTE!
These parameters are active only when 8-01 Control Site is
set to [0] Digital and control word.

8-50 Coasting Select

Option: Function:
Select control of the coasting function via the
terminals (digital input) and/or via the bus.
[0] Digital Activates Start command via a digital input.
input
[1] Bus Activates Start command via the serial
communication port or serial communication
option.
[2] Logic AND Activates Start command via the serial
communication bus/serial communication port,
AND additionally via one of the digital inputs.
[3] Logic OR Activates Start command via the serial
*
communication bus/serial communication port
OR via one of the digital inputs.
8-51 Quick Stop Select
Select control of the quick stop function via the terminals (digital
input) and/or via the bus.
Option:
[0] Digital input
[1] Bus
[2] Logic AND
[3] Logic OR
*

8-52 DC Brake Select

Option: Function:
Select control of the DC brake via the terminals
(digital input) and/or via the serial communi-
cation bus.
NOTE!
Only selection [0] Digital input is available
when 1-10 Motor Construction is set to [1]
PM non-salient SPM.
[0] Digital Activates Start command via a digital input.
input
[1] Bus Activates Start command via the serial
communication port or serial communication
option.
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20872-Danfoss-131H4490-VLT-Automation-VT-Drive-VFD-FC302-460V-25-HP.aspx
FC 300 Programming Guide
8-52 DC Brake Select
Option:
[2]
[3]
8-53 Start Select
Option:
[0]
[1]
[2]
[3]

8-54 Reversing Select

Option:
[0]
Function:
[1]
[2]
[3]
8-55 Set-up Select
Option:
[0]
®
MG33MD22 - VLT is a registered Danfoss trademark
Function:
Logic Activates Start command via the serial
AND communication bus/serial communication port,
AND additionally via one of the digital inputs.
Logic OR Activates Start command via the serial
*
communication bus/serial communication port
OR via one of the digital inputs.
Function:
Select control of the Adjustable frequency drive
start function via the terminals (digital input)
and/or via the serial communication bus.
Digital Activates Start command via a digital input.
input
Bus Activates Start command via the serial
communication port or serial communication
option.
Logic Activates Start command via the serial
AND communication bus/serial communication port,
AND additionally via one of the digital inputs.
Logic OR Activates Start command via the serial
*
communication bus/serial communication port
OR via one of the digital inputs.
Function:
Digital Select control of the Adjustable frequency drive
input reverse function via the terminals (digital input)
and/or via the Serial communication bus.
Bus Activates the Reverse command via the serial
communication port or Serial communication
bus option .
Logic Activates the Reverse command via the Serial
AND communication bus/serial communication port,
AND additionally via one of the digital inputs.
Logic OR Activates the Reverse command via the Serial
*
communication bus/serial communication port
OR via one of the digital inputs.
Function:
Select control of the Adjustable frequency drive
set-up selection via the terminals (digital input)
and/or via the serial communication bus.
Digital Activates the set-up selection via a digital
input input.
3 3
3-91