Danfoss VLT AutomationDrive Programming Manual page 165

Parameter Descriptions
15-62 Option Ordering No
Range:
0 [0 - 0 ] Shows the ordering number for the installed
*
3 3
15-63 Option Serial No
Range:
0 [0 - 0 ]
*
15-92 Defined Parameters
Array [1000]
Range:
0 [0 - 9999 ] View a list of all defined parameters in the
*
15-93 Modified Parameters
Array [1000]
Range:
0 [0 - 9999 ] View a list of the parameters that have been
*
15-99 Parameter Metadata
Array [30]
Range:
0 [0 - 9999 ] This parameter contains data used by the MCT
*
3-140
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20872-Danfoss-131H4490-VLT-Automation-VT-Drive-VFD-FC302-460V-25-HP.aspx
Function:
options.
Function:
View the installed option serial number.
Function:
Adjustable frequency drive. The list ends with 0.
Function:
changed from their default setting. The list
ends with 0. Changes may not be visible until
up to 30 sec. after implementation.
Function:
10 Set-up Software.
MG33MD22 - VLT
FC 300 Programming Guide
®
is a registered Danfoss trademark