Parameters 0-** Operation And Display - Danfoss VLT AQUA Drive FC 202 Programming Manual

Parameter Description

3.2 Parameters 0-** Operation and Display

Parameters related to the fundamental functions of the
frequency converter, function of the LCP keys and configu-
ration of the LCP display.
3 3
3.2.1 0-0* Basic Settings
0-01 Language
Option:
[0] English
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
[6] Svenska
[7] Nederlands
[10] Chinese
[20] Suomi
[22] English US
[27] Greek
[28] Bras.port
[36] Slovenian
[39] Korean
[40] Japanese
[41] Turkish
[42] Trad.Chinese
[43] Bulgarian
[44] Srpski
[45] Romanian
[46] Magyar
[47] Czech
[48] Polski
[49] Russian
[50] Thai
[51] Bahasa
Indonesia
26
Programming Guide
Function:
Defines the language to be used in the
display.
The frequency converter can be delivered
with 2 different language packages.
English and German are included in both
packages. English cannot be erased or
manipulated.
Part of Language packages 1 - 2
Part of Language packages 1 - 2
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Language package 2
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
Part of Language package 2
Part of Language package 1
Part of Language package 2
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
Part of Language package 2
Danfoss A/S © Rev. 2014-01-21 All rights reserved.
0-01 Language
Option: Function:
[52] Hrvatski Part of Language package 2
0-02 Motor Speed Unit
Option: Function:
NOTICE
This parameter cannot be adjusted while the
motor is running.
The display showing depends on settings in
parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings. The default setting of
parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings depends on which
region of the world the frequency converter is supplied
to, but can be re-programmed as required.
NOTICE
Changing the Motor Speed Unit resets certain
parameters to their initial value. It is
recommended to select the motor speed unit
first, before modifying other parameters.
[0] RPM Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1] Hz Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
This parameter cannot be adjusted while the
motor is running.
The display showing depends on settings in
parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings. The default
setting of parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings depends on
which region of the world the frequency converter
is supplied to but can be re-programmed as
required.
The settings not used are made invisible.
[0] Interna- Sets parameter 1-20 Motor Power [kW] units to
tional [kW] and the default value of
parameter 1-23 Motor Frequency [50 Hz].
[1] North Sets parameter 1-21 Motor Power [HP] units to HP
America and the default value of parameter 1-23 Motor
Frequency to 60 Hz.
MG20O702