Parameters: 0-** Operation And Display - Danfoss VLT AutomationDrive FC 300 Programming Manual

Parameter Descriptions

3.2 Parameters: 0-** Operation and Display

Parameters related to the fundamental functions of the
frequency converter, function of the LCP keys and configu-
ration of the LCP display.
3 3
3.2.1 0-0* Basic Settings
0-01 Language
Option:
[0] English
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
[6] Svenska
[7] Nederlands
[10] Chinese
[20] Suomi
[22] English US
[27] Greek
[28] Bras.port
[36] Slovenian
[39] Korean
[40] Japanese
[41] Turkish
[42] Trad.Chinese
[43] Bulgarian
[44] Srpski
[45] Romanian
[46] Magyar
[47] Czech
[48] Polski
[49] Russian
24
®
VLT AutomationDrive Programming Guide
Function:
Defines the language to be used in the
display. The frequency converter can be
delivered with 4 different language
packages. English and German are
included in all packages. English cannot
be erased or manipulated.
Part of Language packages 1 - 4
Part of Language packages 1 - 4
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
Part of Language package 1
Part of Language package 4
Part of Language package 4
Part of Language package 4
Part of Language package 3
Part of Language package 2
Part of Language package 2
Part of Language package 4
Part of Language package 2
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 4
Part of Language package 3
MG33MG02 - VLT
0-01 Language
Option:
[50] Thai
[51] Bahasa Indonesia Part of Language package 2
[52] Hrvatski
0-02 Motor Speed Unit
Option: Function:
NOTE
This parameter cannot be adjusted while the
motor is running.
The display showing depends on settings in 0-02 Motor
Speed Unit and 0-03 Regional Settings. The default
setting of 0-02 Motor Speed Unit and 0-03 Regional
Settings depends on which region of the world the
frequency converter is supplied to, but can be re-
programmed as required.
NOTE
Changing the Motor Speed Unit will reset certain
parameters to their initial value. It is
recommended to select the motor speed unit
first, before modifying other parameters.
[0] RPM Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1] Hz Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
NOTE
[0] Interna-
tional
This parameter cannot be adjusted while
the motor is running.
Activates 1-20 Motor Power [kW] for setting the
motor power in kW and sets the default value
of 1-23 Motor Frequency to 50Hz.
[1] US Activates 1-20 Motor Power [kW] for setting the
motor power in HP and sets the default value
of 1-23 Motor Frequency to 60Hz.
0-04 Operating State at Power-up (Hand)
Option: Function:
Selects the operating mode upon
reconnection of the frequency converter to
mains voltage after power down in Hand
(local) operation mode.
[0] Resume Restarts the frequency converter, maintaining
the same and the same start/stop settings
®
is a registered Danfoss trademark
Function:
Part of Language package 2
Part of Language package 3