Password; Access To Main Menu W/O Password; Quick Menu Password; Access To Quick Menu W/O Password - Danfoss VLT AutomationDrive Programming Manual

Parameter Descriptions
0-50 LCP Copy
Option: Function:
[3] Size indep. from Copy only the parameters that are
LCP independent of the motor size. The
latter selection can be used to
program several adjustable frequency
drives with the same function without
disturbing motor data.
[4] File from MCO to
LCP
[5] File from LCP to
MCO
[6] Data from DYN to
LCP
[7] Data from LCP to
DYN
NOTE!
This parameter cannot be adjusted while the motor is
running.
0-51 Set-up Copy
Option: Function:
[0] No copy No function
*
[1] Copy to set- Copies all parameters in the present
up 1 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 1.
[2] Copy to set- Copies all parameters in the present
up 2 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 2.
[3] Copy to set- Copies all parameters in the present
up 3 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 3.
[4] Copy to set- Copies all parameters in the present
up 4 Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 4.
[9] Copy to all Copies the parameters in the present set-up
over to each of the set-ups 1 to 4.

3.2.7 0-6* Password

0-60 Main Menu Password
Range: Function:
100 [0 - 999 ] Define the password for access to the main
*
menu via the [Main Menu] key. If 0-61 Access
to Main Menu w/o Password is set to Full
access [0], this parameter will be ignored.
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20872-Danfoss-131H4490-VLT-Automation-VT-Drive-VFD-FC302-460V-25-HP.aspx
FC 300 Programming Guide

0-61 Access to Main Menu w/o Password

Option:
[0]
[1]
[2]
[3]
[4]
[5]
[6]
If Full access [0] is selected then 0-60 Main Menu Password,
0-65 Personal Menu Password and 0-66 Access to Personal
Menu w/o Password will be ignored.
NOTE!
More complex password protection is available for OEMs
upon request.

0-65 Quick Menu Password

Range:
200

0-66 Access to Quick Menu w/o Password

Option:
[0]
[1]
[3]
[5]
If 0-61 Access to Main Menu w/o Password is set to Full
access [0], then this parameter will be ignored.
®
MG33MD22 - VLT is a registered Danfoss trademark
Function:
Full access Disables password defined in 0-60 Main
*
Menu Password.
LCP: Read only Prevent unauthorized editing of main
menu parameters.
LCP: No access Prevent unauthorized viewing and editing
of main menu parameters.
Bus: Read only Read-only functions for parameters on
Serial communication bus and/or FC
standard bus.
Bus: No access No access to parameters is allowed via
Serial communication bus and/or FC
standard bus.
All: Read only Read-only function for parameters on LCP,
Serial communication bus or FC standard
bus.
All: No access No access from LCP, Serial communication
bus or FC standard bus is allowed.
Function:
[-9999 - Define the password for access to the quick
*
9999 ] menu via the [Quick Menu] key. If
0-66 Access to Quick Menu w/o Password is
set to Full access [0], this parameter will be
ignored.
Function:
Full access Disables the password defined in
*
0-65 Quick Menu Password.
LCP: Read only Prevents unauthorized editing of quick
menu parameters.
Bus: Read only Read only functions for quick menu
parameters on Serial communication bus
and/ or FC standard bus.
All: Read only read only function for quick menu
parameters on LCP, Serial communication
bus or FC standard bus.
3 3
3-11