Parameters: 0-** Operation And Display - Danfoss VLT AutomationDrive FC 301 Programming Manual

Parameter Descriptions

3.2 Parameters: 0-** Operation and Display

Parameters related to the fundamental functions of the
frequency converter, function of the LCP keys and configu-
ration of the LCP display.
3 3
3.2.1 0-0* Basic Settings
0-01 Language
Option:
[0] English
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
[6] Svenska
[7] Nederlands
[10] Chinese
[20] Suomi
[22] English US
[27] Greek
[28] Bras.port
[36] Slovenian
[39] Korean
[40] Japanese
[41] Turkish
[42] Trad.Chinese
[43] Bulgarian
[44] Srpski
[45] Romanian
[46] Magyar
[47] Czech
[48] Polski
[49] Russian
[50] Thai
24
®
VLT AutomationDrive FC 301/302 Programming Guide
Function:
Defines the language to be used in the
display. The frequency converter is
delivered with 4 different language
packages English and German are
included in all packages. English cannot
be erased or manipulated.
Part of Language packages 1 - 4
Part of Language packages 1 - 4
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
Part of Language package 1
Part of Language package 4
Part of Language package 4
Part of Language package 4
Part of Language package 3
Part of Language package 2
Part of Language package 2
Part of Language package 4
Part of Language package 2
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 4
Part of Language package 3
Part of Language package 2
MG33MH02 - Rev. 2013-09-30
0-01 Language
Option: Function:
[51] Bahasa Part of Language package 2
Indonesia
[52] Hrvatski Part of Language package 3
0-02 Motor Speed Unit
Option: Function:
NOTICE
This parameter cannot be adjusted
while the motor is running.
The display showing depends on settings in 0-02 Motor
Speed Unit and 0-03 Regional Settings. The default
setting of 0-02 Motor Speed Unit and 0-03 Regional
Settings depends on which region of the world the
frequency converter is supplied to, but can be re-
programmed as required.
NOTICE
Changing the Motor Speed Unit resets certain
parameters to their initial value. It is
recommended to select the motor speed unit
first, before modifying other parameters.
[0] RPM Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1] Hz Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
NOTICE
This parameter cannot be adjusted
while the motor is running.
[0] Interna- Activates 1-20 Motor Power [kW] for setting the
*
tional motor power in kW and sets the default value of
1-23 Motor Frequency to 50 Hz.
[1] US Activates 1-20 Motor Power [kW] for setting the
motor power in hp and sets the default value of
1-23 Motor Frequency to 60 Hz.
0-04 Operating State at Power-up (Hand)
Option: Function:
Selects the operating mode upon reconnection
of the frequency converter to mains voltage
after power down in Hand (local) operation
mode.
[0] Resume Restarts the frequency converter, maintaining
the same and the same start/stop settings