Parameters: 0-** Operation And Display - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions

3.2 Parameters: 0-** Operation and Display

Parameters related to the fundamental functions of the
frequency converter, function of the LCP keys and configu-
ration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option: Function:
Defines the language to be used in the
display. The frequency converter is
delivered with 4 different language
packages English and German are included
in all packages. English cannot be erased
or manipulated.
[0] English Part of Language packages 1 - 4
[1] Deutsch Part of Language packages 1 - 4
[2] Francais Part of Language package 1
[3] Dansk Part of Language package 1
[4] Spanish Part of Language package 1
[5] Italiano Part of Language package 1
[6] Svenska Part of Language package 1
[7] Nederlands Part of Language package 1
[10] Chinese Part of Language package 2
[20] Suomi Part of Language package 1
[22] English US Part of Language package 4
[27] Greek Part of Language package 4
[28] Bras.port Part of Language package 4
[36] Slovenian Part of Language package 3
[39] Korean Part of Language package 2
[40] Japanese Part of Language package 2
[41] Turkish Part of Language package 4
[42] Trad.Chinese Part of Language package 2
[43] Bulgarian Part of Language package 3
[44] Srpski Part of Language package 3
[45] Romanian Part of Language package 3
[46] Magyar Part of Language package 3
[47] Czech Part of Language package 3
[48] Polski Part of Language package 4
[49] Russian Part of Language package 3
[50] Thai Part of Language package 2
®
VLT AutomationDrive FC 301/302 Programming Guide
0-01 Language
Option:
[51] Bahasa
Indonesia
[52] Hrvatski
0-02 Motor Speed Unit
Option: Function:
[0] RPM Selects display of motor speed variables and
[1] Hz
0-03 Regional Settings
Option:
[0] Interna-
*
tional
[1] US
0-04 Operating State at Power-up (Hand)
Option:
MG33MI02 - Rev. 2013-11-20
Function:
Part of Language package 2
Part of Language package 3
NOTICE
This parameter cannot be adjusted while the
motor is running.
The display showing depends on settings in
parameter 0-02 Motor Speed Unit and 0-03 Regional
Settings. The default setting of parameter 0-02 Motor
Speed Unit and 0-03 Regional Settings depends on
which region of the world the frequency converter is
supplied to, but can be re-programmed as required.
NOTICE
Changing the Motor Speed Unit resets certain
parameters to their initial value. It is
recommended to select the motor speed unit
first, before modifying other parameters.
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
Function:
NOTICE
This parameter cannot be adjusted while
the motor is running.
Activates parameter 1-20 Motor Power [kW] for
setting the motor power in kW and sets the
default value of parameter 1-23 Motor Frequency
to 50 Hz.
Activates parameter 1-20 Motor Power [kW] for
setting the motor power in hp and sets the
default value of parameter 1-23 Motor Frequency
to 60 Hz.
Function:
Selects the operating mode upon
reconnection of the frequency converter to
mains voltage after power down in Hand
(local) operation mode.
3 3
25