Parameters: 0-** Operation And Display - Danfoss FC 300 Series Programming Manual

Parameter Descriptions

3.2 Parameters: 0-** Operation and Display

3 3
Parameters related to the fundamental functions of the
adjustable frequency drive, function of the LCP buttons and
configuration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option:
[0] English
*
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
Svenska
[7] Nederlands
[10] Chinese
Suomi
[22] English US
Greek
Bras.port
Slovenian
Korean
Japanese
Turkish
Trad.Chinese
Bulgarian
Srpski
Romanian
Magyar
3-2
FC 300 Programming Guide
Function:
Defines the language to be used in the
display. The adjustable frequency drive
can be delivered with 4 different language
packages. English and German are
included in all packages. English cannot
be erased or manipulated.
Part of Language packages 1 - 4
Part of Language packages 1 - 4
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 1
Part of Language package 2
Part of Language package 1
Part of Language package 4
Part of Language package 4
Part of Language package 4
Part of Language package 3
Part of Language package 2
Part of Language package 2
Part of Language package 4
Part of Language package 2
Part of Language package 3
Part of Language package 3
Part of Language package 3
Part of Language package 3
MG.33.MA.22 - VLT
0-01 Language
Option:
Czech
Polski
Russian
Thai
Bahasa Indonesia Part of Language package 2
[99] Unknown
0-02 Motor Speed Unit
Option: Function:
This parameter cannot be adjusted while the motor is
running.
The display showing depends on settings in 0-02 Motor
Speed Unit and 0-03 Regional Settings. The default
setting of 0-02 Motor Speed Unit and 0-03 Regional
Settings depends on which region of the world the
adjustable frequency drive is supplied to, but can be
re-programmed as required.
NOTE!
Changing the Motor Speed Unit will reset certain
parameters to their initial value. It is
recommended to select the motor speed unit
first before modifying other parameters.
[0] RPM Selects display of motor speed variables and
*
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1] Hz Selects display of motor speed variables and
*
parameters (i.e., references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
[0] Interna- Activates 1-20 Motor Power [kW] for setting the
*
tional motor power in kW and sets the default value of
1-23 Motor Frequency to 50 Hz.
[1] US Activates 1-20 Motor Power [kW] for setting the
motor power in HP and sets the default value of
1-23 Motor Frequency to 60 Hz.
This parameter cannot be adjusted while the motor is
running.
®
is a registered Danfoss trademark
Function:
Part of Language package 3
Part of Language package 4
Part of Language package 3
Part of Language package 2