Pump Motor; Removal - prime mover smx45 Master Service Manual

F-code Section
PT S1.0
Electric Motors
Version no T-code
001 SMX
Hydraulic
Line
92
Return
C-code
1700

4.2. Pump Motor

Pump Motor Mounting
Cylinder
Assembly
Contactor
Pump Motor

4.2.1. Removal

Pump
Assembly
Reservoir
3
1
2
Item
No.
1. Park truck on a level surface and make sure
parking brake is applied and load wheels are
blocked to prevent accidental movement.
2. Release pressure in hydraulic system by pressing
the lowering button on steering control handle until
lift cylinder is completely collapsed.
3. Press red OFF button "O" on the keypad and
depress main ON/OFF switch to the OFF position.
4. Disconnect the battery connector from the truck. If
applicable, remove bolts securing the battery to the
truck. Remove battery from the truck.
5. Remove truck cover(s) [see
6. Remove hydraulic line from hydraulic pump
assembly and cap end to prevent contaminants
from entering the hydraulic system.
Master Service Manual
Description
1 Pump Motor Assembly
2 Kit, brush and spring
3 Bearing
page 84.]
2006-08-04