Hydraulic Unit - prime mover smx45 Master Service Manual

F-code Section
PT S6.0
Hydraulic System
Version no T-code
001 SMX
Pump Motor
Lift Motor
Solenoid
Lowering
Valve
Adapter Body
(Pump)
Hydraulic
Reservoir
266
Return
C-code
6000
WARNING

4.1. Hydraulic Unit

Removal
1. Lower forks to the floor.
2. Press red OFF button "O" on the keypad. Depress
3. Disconnect the battery connector from the truck.
4. Remove truck cover(s) [see
5. Remove and tag all wires and cables connected to
6. Remove and cap hydraulic line from the hydraulic
7. Remove bolts attaching hydraulic unit mounting
Fill/Vent
Plug
8. Remove hydraulic unit from truck.
Master Service Manual
DO NOT use your hands to check for
hydraulic leakage.
cardboard or paper to search for leaks.
Escaping fluid
penetrate the skin causing injury. Relieve
pressure before disconnecting hydraulic or
other lines. Tighten all connections before
applying pressure. Keep hands and body
away from pinholes and nozzles which
eject fluids under high pressure.
main ON/OFF switch to the OFF position.
the pump motor (2).
unit. Disconnect contactor control wires.
bracket to truck.
Use a piece
under pressure can
page 84.]
2006-08-08
of