Key Switch (Optional); Horn Switch - prime mover smx45 Master Service Manual

F-code Section
PT S5.4
Switches
Version no T-code
001 SMX
226
Return
C-code
5310

4.4. Key Switch (Optional)

Removal
1. Press red OFF button "O" on the keypad. Turn key
switch OFF.
2. Disconnect the battery connector from the truck.
3. Remove truck cover(s) [see
4. Remove wires from switch terminals.
5. Remove key switch.
Installation
1. Install new key switch.
2. Connect the wires to the terminal.
3. Connect the battery connector to the truck.
4. Turn main ON/OFF switch to the ON position. Turn
key switch ON.
5. Test truck for proper operation before returning to
service.
6. Install truck cover(s).

4.5. Horn Switch

Removal
1. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
2. Disconnect the battery connector from the truck.
3. Remove truck cover(s) [see
4. Disconnect the wires on the switch.
5. Remove horn switch.
Installation
1. Connect the wires to the terminal.
2. Install new horn switch.
3. Connect the battery connector to the truck.
Master Service Manual
page 84.]
page 84.]
2006-08-08