prime mover smx45 Master Service Manual page 277

© BT Prime-Mover, Inc.
Return
NOTE! DO NOT use your hands to check for
hydraulic
cardboard or paper to search for leaks.
Escaping
penetrate the skin causing an injury.
Relieve pressure before disconnecting
hydraulic
connections
Keep hands and body away from pinholes
and nozzles when eject fluids under high
pressure.
8. Turn the main ON/OFF switch to the ON position.
Enter key code and press the green ON button "I"
on the keypad.
9. Test operation of cylinder and look for leakage
around fitting and cylinder rod.
Master Service Manual 2006-12-12
F-code Section
PT S6.1
Lift Cylinder
Version no T-code
000 SMX
leakage. Use a
fluid under pressure
or other lines. Tighten
before applying
C-code
6420
piece of
can
all
pressure.
275