Service Display - prime mover smx45 Master Service Manual

No.
1
2
3
4
5
6
7
8
© BT Prime-Mover, Inc.
Return
•

3.3.2. Service Display

Connect the service key (see
J41 (see
keypad. The battery status is displayed and the armature
current symbol is lit continually. Use the horn button (S18) to
toggle between display modes.
Flashing Symbol
NOTE!
Master Service Manual
F-code
PT
Version no
002
parameter number display. All driver parameters
and drivers are cycled through before Service
Parameters, 0 = 10th driver.)
(P)art (n)umbers: use thumb control to scroll
through the following:
• (S)oftware (P)art (n)umber
• (H)ardware (P)art (n)umber
• (H)ardware (S)erial (n)umber
page 194.) Push the green ON button "I" on the
Displayed Data
Speed reference value sent to transistor controller:
-127 (FL) to +127 (FT) x parameter 2 for Fast
Digital inputs/outputs from transistor controller –
see page 170
Battery voltage (V) at ETAC
Armature current (A)
Field current (A)
Armature PWM (%)
Transistor Controller System Mode – see
Field resistance (Ohms), used for thermal cutback
The first driver's Driver Parameters are
used while in Service Display.
2006-12-12
Section
S5.0
Electrical Functions
T-code
SMX
page 174) in connection point
page 171
C-code
5000
169