Hydraulic System - prime mover smx45 Master Service Manual

© BT Prime-Mover, Inc.
Return

2.4.2. Hydraulic System

The hydraulic system should be drained, flushed and refilled.
Clean the hydraulic filters when hydraulic fluid is changed.
The pressure relief valve setting should be checked.
WARNING
Before siphoning oil from the reservoir,
make certain siphon is clean.
To drain reservoir, disconnect and remove the hydraulic
pump assembly (see
Master Service Manual 2006-08-03
F-code Section
PT P2.0
Service Schedule
Version no T-code
001 SMX
page 257.)
C-code
69