Filter Screen And Inlet Tube - prime mover smx45 Master Service Manual

Filter Screen
© BT Prime-Mover, Inc.
Return
Installation
1. Lubricate O ring with hydraulic fluid. Install O ring.
2. Carefully install reservoir on adapter (32) housing
3. Install hydraulic unit on truck (see

4.4. Filter Screen and Inlet Tube

Removal
1. Remove reservoir (see
2. With pump assembly inverted, unthread and
3. Clean filter screen at the bottom of the inlet tube
Inspection
Inlet Tube
1. Inspect filter screen and inlet tube for defects.
Installation
1. Install inlet tube sealing washer and fitting in the
2. Install hydraulic reservoir to gain access to the
3. Install hydraulic unit on truck (see
Master Service Manual
F-code
PT
Version no
001
and attach with hose clamp. Torque clamp to 48 -
60 in-lbs (5.5 - 7 N•m).
remove inlet tube fitting and sealing washer from
pump housing.
with a suitable cleaning solution.
Replace if necessary.
pump housing. Torque to 245 - 275 in-lbs (27 - 31
N•m).
pump.
2006-08-08
Section
S6.0 6000
Hydraulic System
T-code
SMX
page 267.)
page 268.)
page 267.)
C-code
269