prime mover smx45 Master Service Manual page 239

© BT Prime-Mover, Inc.
Return
Item No. Description
1 Drive controller
2 Screw
3 Contactor
4 Panel
5 Battery connector
6 Nut
7 Decal, breaker
8 Decal, fuse
9 Lockwasher
Replace main contactor if coil resistance is outside a range
between 20 and 40 ohms.
Removal
1. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
Disconnect the battery connector from the truck.
2. Remove truck cover(s) [see
3. Disconnect the wires from the X and Y terminals on
the contactor (3) coils.
Master Service Manual 2004-03-10
F-code
PT
Version no T-code
000 SMX
Item No. Description
10 Screw
11 Control cable / harness
12 Horn
13 Screw
14 Relay
15 Screw
16 Breaker, circuit
17 Bar, bus
18 Screw
page
X and Y
Terminals
Bus Bar
Figure 5-6: Main Contactor
Section C-code
S5.6 5436
Contactor Panel
84.]
237