Caster Wheel (Optional); Theory Of Operation; Maintenance; Inspection - prime mover smx45 Master Service Manual

Caster
Assembly
© BT Prime-Mover, Inc.
Return

Caster Wheel (Optional)

1. Theory of Operation

The caster assembly is mounted on the truck bumper to
provide truck maximum stability.

2. Maintenance

Normal maintenance includes lubricating the grease fittings
on the caster assembly periodically.
Maintenance Schedule" on page

2.1. Inspection

1. Park truck on a level surface and make sure
parking brake is applied and load wheels are
blocked to prevent accidental movement.
2. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
3. Disconnect the battery connector from the truck.
When using compressed air, wear effective
WARNING
chip-guarding
equipment.
cleaning MUST be reduced to less than 30
psi (207 kPa).
NOTE! CLEANLINESS! Perform procedures in a
clean environment. Make sure all parts are
cleaned before disassembly and kept clean
during assembly.
4. Thoroughly clean all parts and remove all nicks
and burrs with emery cloth.
5. Inspect all bearings and replace as necessary.
6. Inspect wheel(s) for flat spots or pieces of material
missing from tire.
7. Fill caster wheel with grease (see
Master Service Manual 2005-07-11
F-code Section
PT S3.3
Caster Wheel (Optional)
Version no T-code
001 SMX
(See "Planned
61.)
and personal
Compressed air used for
page
C-code
3560
protective
72.)
125