Repair And Rebuild - prime mover smx45 Master Service Manual

© BT Prime-Mover, Inc.
Return

4. Repair and Rebuild

Contact your local battery supplier for replacements or
rebuilds.
Removal
1. Park truck on a level surface and make sure
parking brake is applied and load wheels are
blocked to prevent accidental movement.
2. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
3. Disconnect the battery connector from the truck.
4. Position battery replacement device in accordance
with the supplier's recommendations.
5. If applicable, remove bolts securing the battery to
the truck. Remove battery from truck onto suitable
battery table or with battery lifting device.
Installation
1. With a fully charged and tested battery on the
battery handling device, position the handling
device at truck in accordance with the supplier's
recommendations.
2. Move the battery into the compartment. Be sure
the battery has no more than 0.50 inch (13 mm) of
"free play" movement in the battery compartment.
If applicable, secure battery bolts to the truck.
3. Move handling device from the area.
4. Connect the battery connector to the truck.
5. Remove blocks. Turn the main ON/OFF switch to
the ON position. Enter key code and press the
green ON button "I" on the keypad.
6. Test truck for proper operation before returning to
service.
Master Service Manual 2006-08-08
F-code Section
PT S5.1
Version no T-code
001 SMX
C-code
5110
Battery
203