Battery Connector; Theory Of Operation; Maintenance; Inspection - prime mover smx45 Master Service Manual

Battery Connector

© BT Prime-Mover, Inc.
Return
Battery Connector

1. Theory of Operation

The truck battery connector is located at the top of the truck
cover. The battery and charger have similar battery
connectors. It is necessary to connect the battery to the truck
before powering ON.

2. Maintenance

Visually inspect cables and connectors. Negative and positive
cables should be visually inspected for breaks and wear.
Check connectors for damage and to ensure proper
connections of cables.

2.1. Inspection

1. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
2. Disconnect the battery connector from the truck.
3. Check the battery connectors for damaged cables.
4. Check to see if cables are pulling out of the
connectors.
5. Check cables at battery terminals. Connections
should be tight, with no corrosion.
6. Check inside connectors at internal contacts for
damage, dirt, or corrosion. DO NOT use a metal
object to clean connectors.
7. Connector housings must not be cracked or
broken.

3. Troubleshooting

Make sure cable wires are in good condition and connector
has proper connections to cables.
Master Service Manual 2004-03-08
F-code Section
PT S5.3
Battery Connector
Version no T-code
000 SMX
C-code
5190
215