prime mover smx45 Master Service Manual page 105

© BT Prime-Mover, Inc.
Return
Removal
There is no brake on the truck when the
WARNING
drive
transmission assembly. Block all wheels to
reduce the risk of truck movement.
NOTE! Call-outs in the following procedure refer to
illustration on
1. Lower forks.
2. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
3. Disconnect the battery connector from the truck.
4. Remove truck cover(s) [see
5. If applicable, remove bolts securing the battery to
the truck. Remove the battery from the truck.
6. Jack truck and block the frame (see
7. Disconnect handle harness.
Master Service Manual 2006-08-04
F-code Section
PT S2.0
Version no T-code
001 SMX
motor is removed
page 101.
page
Bolts
Stem
Mount
Figure 2-2: Stem Mount
C-code
2550
Transmission
from the
84.]
page 58.)
103