Troubleshooting; Repair And Rebuild - prime mover smx45 Master Service Manual

F-code Section
PT S5.5
Fuses/Circuit Breakers
Version no T-code
001 SMX
234
Return
C-code
5390

3. Troubleshooting

During troubleshooting and repairs, it is sometimes
necessary to unmate a connector, move a harness, cut a
cable tie, or remove wire from a bracket. Note carefully the
location of wire and all protective or securing attachments
before moving harness. When replacing fuses, make sure
fuses are installed in the proper position.

4. Repair and Rebuild

Repair or replace damaged cables or mounting hardware as
necessary. Power cables are marked on terminal lug with
location where they belong. If marking is missing or is not
readable, remark cable with correct information. The terminal
lugs should be crimped tightly and securely on the wire.
Replace cable if necessary. After repair, return or replace all
protective and/or securing hardware to its original condition.
Protective materials are necessary to provide reliable
performance of interconnect system. The fuses can not be
repaired or rebuilt. Replace fuses with new as necessary.
Master Service Manual 2006-08-08