prime mover smx45 Master Service Manual page 120

F-code Section
PT S3.1
Drive Wheel
Version no T-code
001 SMX
118
Return
C-code
3530
2. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
3. Disconnect the battery connector from the truck.
4. Remove truck cover(s) and bumper (see
5. Hoist truck and securely block truck with drive tire
approximately 1 inch (25 mm) off floor.
6. Remove hub (3) and nuts (4). Pull tire and wheel
from transmission drive axle.
Installation
1. Install new tire and hub (3) on transmission drive
axle and secure with nuts (4). In a crossing pattern,
torque nuts to 55 ft-lbs (74.6 N•m).
2. Attach bumper with bolts, apply Loctite 243
bolts, and tighten.
3. Remove blocking. Connect the battery connector
to the truck.
4. Turn the main ON/OFF switch to the ON position.
Enter key code and press the green ON button "I"
on the keypad.
5. Check operation of drive wheel.
Service Manual
page 84.)
®
to
2006-08-04