Operator Display And Programming; Special Modes - prime mover smx45 Master Service Manual

F-code Section
PT S5.0
Electrical Functions
Version no T-code
002 SMX
168
Return
C-code
5000

3.3. Operator Display and Programming

The display is located on the top of the steering control
handle arm and displays the operator and machine-specific
register.
E
Operator Display

3.3.1. Special Modes

To enter a special truck mode proceed as follows:
1. Hold down horn switch.
2. Enter PIN code on keypad and push green ON
button (l) or turn key switch ON.
3. Release horn switch at desired display mode.
Options for the display mode are follows:
• (H)ourmeters; use thumb control to choose, see
parameter 20 on
(hours shown are rounded down, i.e., 3 hours 50
minutes will display as 3.)
• (E)rror codes log; the most recent error code will
be displayed followed by the hour meter (activity
time) it occurred. Use thumb control to scroll
through the last 50 error codes (if no error code is
logged, dashes will be displayed.)
• (P)arameters: use thumb control to choose and the
horn switch to access a parameter, the parameter
light blinks (a service key is required to change
some parameters (see
service
parameters and parameter 10, the driver
number appears to the right of the normal
Master Service Manual
A
A - Numerical Field
B - Hour Meter Indicator
C - Parameter Control
D - Battery Indicator
E - Error Indicator
D B
C
page 178
key is used
for Hourmeter options
page 174.) When the
to change driver
2006-12-12