F-code
Section
PT
S5.0
Electrical Functions
Version no
T-code
002
SMX
180
Return
C-code
5000
3.6. Error Codes (E)
When an error occurs on the truck, a code is displayed (see
page
181.)
3.6.1. Error Code History
To access the error code history, proceed as follows:
1. Enter special truck mode (see
2. Press and hold the horn button until "E" is
displayed. The error indicator (wrench icon) is
illuminated (see
Use the thumb control to scroll through the last 50
error codes. The latest fault is shown first. The
display first shows the error code and then the hour
meter reading the fault occurred.
The error codes are divided into two groups; C -
Caution and E - Error.
The C error codes are not stored. It is only a
caution and is highlighted on the display as long as
the fault exists.
For example, if only one fault is registered in the
memory, the second empty place is shown as
follows: Fault E - - - and time: - - -.hour meter
reading.
3. End displaying the error code history by pressing
the red OFF "O" key on the keypad.
Master Service Manual
page
168.)
page
169.)
2006-12-12