prime mover smx45 Master Service Manual page 146

F-code Section
PT S4.2
Steering Bearing
Version no T-code
000 SMX
144
Return
C-code
4180
Installation
1. Install
lockwashers (2) and screws (1) on transmission.
2. Install transmission (see
3. Connect all electrical connections.
4. Refill transmission with fluid as needed (see
page
5. Install truck cover(s) [see
6. Remove blocks.
7. Connect the battery connector to the truck.
8. Turn main ON/OFF switch to the ON position.
Enter key code and press the green ON button "I"
on the keypad. Operate the truck's hydraulic
system and check operation of system as a whole.
Look for leaks and tight places on the lifting
linkage.
Master Service Manual
new bearing (3)
page
72.)
page
and secure with
106.)
84.]
2004-02-13