Troubleshooting - prime mover smx45 Master Service Manual

F-code Section
PT S3.0
Parking Brake System
Version no T-code
001 SMX
112
Return
C-code
3300
6. Loosen assembly mounting bolts on brake.
7. Turn the adjusting screws while checking the air
gap at several points with a 0.008 to 0.014 inch
(0.2 to 0.36 mm) feeler gauge.
8. Tighten the mounting bolts to 50 in-lb (5.6 N•m).
Recheck the gap with feeler gauge.
Adjusting
Screw
Friction disk

3. Troubleshooting

Check brake disk for wear. Replace friction disk if worn
unevenly or when its total thickness is reduced to 0.20 inch
(5.5 mm).
Master Service Manual
Air Gap
0.008 - 0.014 inch
(0.2 - 0.36 mm)
Pressure Plate
Mounting Bolt
Coil Housing
2006-08-04