Decals; Decal With Protective Sheet; Decal Without Protective Sheet - prime mover smx45 Master Service Manual

© BT Prime-Mover, Inc.
Return

Decals

Remove and replace any decals that are damaged or
missing. Remove a damaged decal by using a sharp edge to
peel the decal from the surface. Use caution not to scratch or
damage the paint on the truck when removing the decal. New
warning decals are free from BT Prime-Mover. Refer to truck
parts book for location and quantities of the decal.
Using a cleaning solution, thoroughly clean the surface of the
truck before applying a new decal. Allow the surface to dry
completely, be sure that there is no residue. Touch up the
paint in area of the decal, as required.

1. Decal with Protective Sheet

To install this style, peel off the backing, place the decal into
position, and press the decal into place. Do not wrinkle the
decal. Rub over the protective over-sheet with a firm, straight,
plastic edge to remove air bubbles and any wrinkles. Peel off
the over-sheet.

2. Decal without Protective Sheet

To install this style, peel off the backing, place the decal into
position, and press the decal into place. Do not wrinkle the
decal. Smooth the decal into place using clean fingers. Be
sure all the edges are secured to the surface.
Master Service Manual 2004-01-30
F-code Section
PT S0.3
Version no T-code
000 SMX
C-code
0851
Decals
85