Main Harness Replacement - prime mover smx45 Master Service Manual

F-code Section
PT S5.0
Electrical Functions
Version no T-code
002 SMX
164
Return
C-code
5000

3.2. Main Harness Replacement

NOTE!
Power Cables
on Left Side
1. Park the truck on a level surface and make sure
the parking brake is applied and load wheels are
blocked to prevent accidental movement
2. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
3. Disconnect the battery connector from the truck.
4. Remove the truck covers and upstop (see
Figure 5-5 on page
wiring and cables.
NOTE!
5. Disconnect connector J11 and switches S24 and
S25 inside the stem mount and all ring terminals
from
Figure
Master Service Manual
Before removal of harness, document wire
to terminal connections for main harness.
Control Wires/
5
3
6
4
Figure 5-2: Terminal Block
166) to gain access to the
Reference the electrical schematic on
page 194 for location on connectors and
switches.
the drive motor
5-2.)
Wire Guard
26
57
see
terminal block (see
2006-12-12