prime mover smx45 Master Service Manual page 145

© BT Prime-Mover, Inc.
Return
The steering bearing can not be repaired or rebuilt. Replace
steering bearing with new as necessary.
Removal
1. Park truck on a level surface and make sure
parking brake is applied and load wheels are
blocked to prevent accidental movement.
2. Release pressure in hydraulic system by pressing
the lowering button on steering control head.
3. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
Disconnect the battery connector from the truck.
4. Jack truck and block the frame (see
5. Remove truck cover(s) [see
6. Disconnect all electrical connections on drive
motor and brake assembly.
7. Remove transmission (see
8. Remove screws (1) and lockwashers (2) from
bearing (3). Remove bearing (3) from transmission
assembly (5).
Master Service Manual 2004-02-13
F-code Section
PT S4.2
Steering Bearing
Version no T-code
000 SMX
page
page 84.]
page 103.)
C-code
4180
58.)
143