Lift Limit Switch - prime mover smx45 Master Service Manual

© BT Prime-Mover, Inc.
Return
Installation
1. Mount the switch to the mounting bracket.
2. Connect the wires to the switch.
3. Connect the battery connector to the truck.
4. Turn main ON/OFF switch to the ON position.
Enter key code and press the green ON button "I"
on the keypad. Test drive the truck.
5. Adjust switch if necessary (see
6. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
7. Install truck cover(s).

4.3. Lift Limit Switch

Removal
1. Press red OFF button "O" on the keypad. Depress
main ON/OFF switch to the OFF position.
2. Disconnect the battery connector from the truck.
3. Disconnect the wires on the switch.
4. Remove truck cover(s) [see
5. Remove lift limit switch.
Installation
1. Connect the wires to the terminal.
2. Install new lift limit switch.
3. Connect the battery connector to the truck.
4. Turn main ON/OFF switch to the ON position.
Enter key code and press the green ON button "I"
on the keypad.
5. Test truck for proper operation before returning to
service.
6. Install truck cover(s).
Master Service Manual 2006-08-08
F-code Section
PT S5.4
Version no T-code
001 SMX
page 220.)
page 84.]
C-code
5310
Switches
225