Wiring Harness - prime mover smx45 Master Service Manual

F-code Section
PT S5.5
Fuses/Circuit Breakers
Version no T-code
001 SMX
230
Return
C-code
5390

2.1. Wiring Harness

When working on the truck, use care around the wiring
harnesses.
• Do not pull on wires.
• Carefully mate and unmate all connectors.
• Do not pry apart connectors with unspecified tools.
• Examine and maintain any added materials used
to dress or protect wire. This includes spiral wrap,
brackets, cable ties, fasteners, flexible conduit, etc.
• Check harness wires for abrasions, scrapes, nicks
in wire, damage from overheating or burns, or
other general insulation damage.
• Replace terminations with exposed wire visible at
connectors.
wires,
operational failure of truck.
There should be a wire marker at each termination. If marker
is missing or unreadable, remark wire to allow easier
identification.
NOTE!
Master Service Manual
Damaged terminations,
or damaged connectors
It is normal to find unused connectors for
uninstalled options that have had heat
shrink applied over them and have been
strapped to harness.
exposed
can cause
2006-08-08