Swing Out Battery Pack; Theory Of Operation; Maintenance; Electrical Testing - prime mover smx45 Master Service Manual

Electric walkie low-lift pallet truck
Hide thumbs Also See for smx45:
Table of Contents

Advertisement

© BT Prime-Mover, Inc.
Return

Swing Out Battery Pack

1. Theory of Operation

The truck may be equipped with a multiple battery pack, or a
maintenance-free battery and charger.

2. Maintenance

Battery electrolyte is a solution of sulfuric
WARNING
acid and water. Battery acid causes burns.
Should any electrolyte come in contact with
clothing or skin, flush the area immediately
with cold water. Should the solution get on
your face or in the eyes, flush the area with
cold water and receive medical attention
immediately.
Before working on the battery, review
CAUTION
Battery Safety beginning on
Batteries may weigh more than 200 pounds
(91
replacement. Use a suitable replacement
device or hoist for lifting.

2.1. Electrical Testing

2.1.1. Required Equipment

1. Common hand tools.
2. AC/DC volt/ohm meter.
3. Battery connector with + to - loop (use on charger
only.)
4. Battery hydrometer.

2.1.2. Instructions

1. Check condition of batteries (check each cell.)
a. Specific gravity, before and after charging.
Acceptable values:
Dead battery - 1.180
Fully charged battery - 1.280
Master Service Manual
2006-08-08
F-code
Section
PT
S5.2
Swing Out Battery Pack
Version no
T-code
002
SMX
kg).
Use
extreme
C-code
5110
page
20.
care
during
205

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents