Technical Service Data - prime mover smx45 Master Service Manual

Type
Power - horsepower [hp] (kilowatts [kW])
Duty factor
Min carbon brush length - inch (mm)
Min commutator diameter - inch (mm)
Min brush spring tension - ounce-force foot (N•m)
Gear ratio
Oil volume, oz (liter)
Standard operation (see
down to 32° F (0° C)
Cold Storage Conditioning (see
temperatures down to 5° F (-15° C) or down to -13° F
(-25° C) for intermittent operation
Drive wheel - inch (mm)
Drive wheel weight without load with battery - lb (kg)
Drive wheel weight with rated load and battery - lb (kg)
Torque drive axle nut, ft-lbs (N•m)
Load wheel - inch (mm)
Load wheel weight with rated load - lb (kg)
© BT Prime-Mover, Inc.
Return

Technical Service Data

NOTE!
Drive Unit
Drive Gear Ambient Temperatures
page 59) temperature down
page 59)
Wheels
Master Service Manual
F-code
PT
Technical Service Data
Version no
002
When the battery
performance may vary due to motor and
system efficiency
service data represents nominal values
obtained under typical operating conditions.
Specifications are
without notice.
Shunt wound
1.2 (0.90)
0.59 (15)
1.85 (47)
44.8 (3.8)
13.5 (0.4)
Mobil-1 Synthetic Gear Lube 75W-90
or Texaco Synstar GL 75W-90
Mobil-1 Synthetic Gear Lube 75W-90
or Texaco Synstar GL 75W-90
10.0 x 5.0 (255 x 125)
710 (322)
1650 (748)
55 (74.6)
3.25 x 4.50 (82 x 115)
3805 (1725)
2006-08-03
Section C-code
M2.0
T-code
SMX
is fully charged,
tolerance. Technical
subject to change
1 hour
22:1
51